You probably didn't even realise, when you got up this morning, just how much you don't know about earthquakes.
Subscribe now for unlimited access.
or signup to continue reading
An earthquake in Victoria, felt as far away as Tasmania and the NSW Central Coast, was 5.9 on the Richter scale.
The earthquake's epicentre was at Gaffneys Creek, near Mansfield, about 190 kilometres' drive north-east of Melbourne at the foothills of Victoria's high country.
Here's the lowdown on earthquakes from the experts at Geoscience Australia.
What is an earthquake?
Earthquakes are the vibrations caused by rocks breaking under stress. The underground surface along which the rock breaks and moves is called a fault plane.
The focus, or "hypocentre", of an earthquake is the point where it originated within the Earth. The point on the Earth's surface directly above the focus is called the earthquake epicentre.
The size or magnitude of earthquakes is determined by measuring the amplitude of the seismic waves recorded on a seismograph and the distance of the seismograph from the earthquake. These are put into a formula which converts them to a magnitude, which is a measure of the energy released by the earthquake. For every unit increase in magnitude, there is roughly a thirty-fold increase in the energy released. For instance, a magnitude 6.0 earthquake releases approximately 30 times more energy than a magnitude 5.0 earthquake, while a magnitude 7.0 earthquake releases approximately 900 times (30x30) more energy than a magnitude 5.0.
A magnitude 8.6 earthquake releases energy equivalent to about 10 000 atomic bombs of the type developed in World War II. Fortunately, smaller earthquakes occur much more frequently than large ones and most cause little or no damage.
Earthquake magnitude was traditionally measured on the Richter scale. It is often now calculated from seismic moment, which is proportional to the fault area multiplied by the average displacement on the fault.
.
Where do earthquakes occur?
No part of Earth's surface is immune from earthquakes, but some regions experience them more frequently than others. They are most frequent and largest at tectonic plate boundaries where two plates are colliding and/or sliding past one another. They particularly occur around the margins of the Pacific Plate, for example in New Zealand, Vanuatu, the Solomon Islands, Papua New Guinea, Japan and the Americas, and also along the Indonesian islands arc, where the Indo-Australian Plate collides with the Eurasian Plate. The depths of focus in these collision zones can range from the surface to 700 km in depth. Large shallow earthquakes also occur where two plates are pulling apart with the creation of new oceanic crust along mid-ocean ridges and on the transform faults that intersect them.
In the relatively stable interior of continents, away from plate boundaries, earthquakes are less common and do not follow easily recognisable patterns. These 'intraplate' earthquakes generally originate at shallow depths (i.e. less than 20 km), but can still be of large magnitude. In 1811-1812 four earthquakes of estimated magnitude 7 occurred in the New Madrid region of the eastern United States. More recently, the magnitude 7.7 2001 Bhuj earthquake in intraplate India killed more than 20,000 people.
Australia's biggest quake
Australia's largest recorded earthquake was in 1988 at Tennant Creek in the Northern Territory, with an estimated magnitude of 6.6. It occurred in a sparsely populated area and resulted in damage to a major gas pipeline. A magnitude 6.5 earthquake at Meckering in 1968 caused extensive damage to buildings and was felt over most of southern Western Australia. These earthquakes are two of the eleven that are recorded to have produced surface rupture in historical times, forming fault scarps.
Quakes don't have to be 'the biggest' to do mass damage
In 1989, on December 28, earthquake measuring 5.6 on the Richter scale hit Newcastle. The earthquake's epicentre was approximately 15 kilometres from Newcastle's central business district.
That earthquake caused 13 fatalities; and 160 people were injured.
Over 350 fault scarps are mapped across Australia, with the majority being thought to relate to large pre-historical earthquakes. Study of these features allows for patterns in the recurrence and magnitude of the largest Australian earthquakes to be inferred. While large earthquakes are seen to have occurred across Australia, failed rifts and the margins of the ancient cratonic building blocks that make up the continent are seen to be particularly earthquake-prone.
Why do we get earthquakes in Australia?
The Australian plate is the fastest moving continental land mass on Earth and is colliding into the Pacific plate to Australia's north and east, and the Eurasian Plate to the northwest. This generates mainly compressive stress in the interior of the Australian continent, which is slowly building up across the plate as it moves northeast about 7cm per year. Australia's earthquakes are caused by the sudden release of this stress when rocks deep underground break and move along a fault line. While some parts of the country are more likely to experience earthquakes than others, large earthquakes can occur anywhere across the continent, and without warning.
On average 100 earthquakes of magnitude 3 or more are recorded in Australia each year. Earthquakes above magnitude 5.0, such as the destructive 1989 Newcastle earthquake, occur on average every one-to-two years. About every ten years Australia experiences a potentially damaging earthquake of magnitude 6.0 or more such as the magnitude 6.5 Meckering earthquake in October 1968.
Why are earthquakes felt in different ways?
Magnitude is only one indicator of the expected impacts that an earthquake can have in any given region. The resulting severity of shaking during an earthquake is affected by other specific and unique factors such as the depth of the earthquake, local geology and soil conditions.
Building damage also depends on the quality and type of construction. Clearly, the distance from the epicentre will also have an effect on the vibrations felt at a location.
The epicentre
The 2-dimensional location of an earthquake is known as its epicentre. This is the point plotted on a map. Sometimes the earthquake's location is also called the hypocentre. The hypocentre is the 3-dimensional location of the earthquake, which, along with its location, includes its depth within the Earth. Because a seismogram clearly depicts the onset of an earthquake, the location measured defines the point where the earthquake begins to rupture along the fault plane. For large earthquakes, the epicentre is not necessarily the point along the fault plane where the most shaking or damage will occur.
Earthquake and tsunami monitoring
Geoscience Australia monitors, analyses and reports on significant earthquakes to alert emergency managers, government and the public about earthquakes in Australia and overseas. These alerts then enable emergency managers to inform the community of earthquakes in their local region, and for the appropriate level of emergency response and assistance to be dispatched.
No warning
Earthquakes cannot be predicted. An earthquake can only be alerted for its time, location and magnitude once it has been recorded and analysed by the Geoscience Australia Duty Seismologist. Firstly, the seismic energy must be large enough to reach a minimum of three seismometers. This can take about 3 to 4 minutes.
Once the location of the earthquake has been computed, the magnitude can be determined. This can take a further 3 to 4 minutes. So earthquake are generally notified in about 10 minutes, but are always alerted as soon as possible.
Sometimes the alerts can be as quick as 6 to 7 minutes depending on the distribution and number of seismometers around the epicentre. However, small earthquakes with magnitude less than 2.5 can take longer as the seismic waves can sometimes be difficult to analyse.
Letting the community know when an earthquake occurs
Earthquake alerts are important for emergency managers and the general public. For small earthquakes that occur nearby, the tremor may sound like an explosion or a strong thud, like something has smashed into the house.
The effected population want to know what it was and what's likely to happen. If Geoscience Australia can locate a seismic event, then it can determine its magnitude and advise the public via the Geoscience Australia website and @EarthquakesGA Twitter feed.
For large, potentially damaging earthquakes which may shake an entire State, the need for an immediate emergency response to save lives becomes vital. Although a large area or region may have been impacted by the earthquake's shaking, the earthquake alert provides emergency responders the location of the most likely areas of greatest damage and where to initially focus their rescue efforts.
What to do in an earthquake
There are a number of ways to remember what to do if an earthquake occurs. People who experience an earthquake should stay indoors and seek shelter under a table, bench or door frame - you can remember to "Drop, Cover, Hold" when you feel an earthquake. Afterwards it is vital to stay vigilant - expect possible aftershocks, listen to the local radio for updates, avoid using phones or driving, stay calm and help others if possible.
You can help
You can help Geoscience Australia's earthquake research by reporting if you have felt an earthquake. More information can be found on our website at www.ga.gov.au/earthquakes.
This information has been reproduced with the permission of Geoscience Australia.